Well I had to make my own paint shop as I was getting gassed (c:

So a nice big Christmas bag with a 4" flexi pipe fixed to the bottom with an extract fan pulling the air out and

dumping it out of the loft air vent in the roof, it works great, a filter at the back to save my fan from the paint.

First coat looks good, Ill re spray when I am closer to completion.

Once dried a quick test fit for fixings and electronics etc all looks well

Still awaiting delivery of the motor and think it may require a brushless one to get it off the ground.

May have to do some magic making the wires disappear and put the pilot etc in there.

Coming along slowly.


Back   Next

Back to top