Motor and Prop.

Change of plan, new motor 1000 to 1200W Turnigy

rather large (c:

Balancing the props, use nail varnish to add weight to the light blade rather than try to sand the heavy one, much easier (cheers Simon!)

Two props to test 14x10 and 15x10  840W to 1000W on 22v.

Mounting the motor tomorrow, unless the wind drops and I can go fly.

Opening up the front to take the motor.

Test fit looks good.

motor mount.

Lifts in from the bottom and secured in slot.

Power testing.


The crash video!

Back to top